Understanding Whirlpool Washer Error Codes

Understanding Whirlpool Washer Error Codes. Unsure what the error code on your Whirlpool washer means? This guide provides a complete list of Whirlpool washer error codes, explaining what each signifies and offering tips for resolving them. Whether you have a front- or top-load Whirlpool washer, this guide will help you clear those pesky codes and get back to using your machine.

Whirlpool Error Codes for Top-Load Washers

drn

• Meaning: Washer unable to drain properly.
• Fix:
  • Ensure the drain system is installed correctly.
  • Check that the drain hoses are not kinked or clogged.

F#E# or F##

• Meaning: System error.
• Fix:
  • Press START/PAUSE once to clear the code, and once more to restart. If the code persists, call an appliance repair technician.

HC

• Meaning: Hot and cold water inlet hoses installed in reverse.
• Fix:
  • Turn off the water supply and reinstall the hoses in the correct order.

LdL

• Meaning: Lid failing to lock.
• Fix:
  • Ensure no laundry or items are caught in the lid.
  • Inspect the lid lock for damage or detergent buildup.

LdU

• Meaning: Lid unable to unlock.
• Fix:
  • Remove any items from the washer lid, such as detergent boxes or laundry baskets.

lid

• Meaning: Lid left open during a cycle.
• Fix:
  • Close the lid. If the lid is left open for over 10 minutes, the washer will drain the water and end the cycle.

LF, LoFL, or F8E1

• Meaning: Washer struggling to fill with water.
• Fix:
  • Ensure hot and cold water supply faucets are fully opened.
  • Check that both water hoses are connected and not kinked or clogged.
  • Clean the inlet screens on the washer.

Ofb

• Meaning: Load out of balance.
• Fix:
  • Allow the washer to run its load-balance correction routine.
  • Redistribute items evenly.
  • Avoid washing single items, and check if the appliance is level.

OL

• Meaning: Machine overfilled.
• Fix:
  • Reduce the load size and close the lid to resume the cycle.

PF

• Meaning: Interrupted by a power outage.
• Fix:
  • Press and hold START to resume the cycle, or press POWER to clear the error.

Sud

• Meaning: Too many suds in the washer.
• Fix:
  • Use high-efficiency (HE) detergent in the correct amount.

Whirlpool Error Codes for Front-Load Washers

dET

• Meaning: Detergent cartridge not detected.
• Fix:
  • Check that the detergent cartridge is inserted properly and the dispenser drawer is fully shut.

Int

• Meaning: Washer stopped during a cycle.
• Fix:
  • Wait for the machine to drain the water.
  • Unplug the washer for 1 minute and then plug it back in to reset.

rL or F34

• Meaning: Items detected in the drum during a Clean Washer cycle.
• Fix:
  • Ensure the washer is empty when running this cycle.

F5 E2

• Meaning: Door failing to lock.
• Fix:
  • Ensure no items are obstructing the door.
  • Make sure the door is closed fully.
  • Press Pause twice, followed by the Power button once to clear.

F7 E1

• Meaning: Motor failing to reach the correct speed.
• Fix:
  • Remove all shipping bolts.
  • Ensure the washer is not overfilled.
  • Press Pause twice and Power once to clear.

F8 E1 or LO FL

• Meaning: Low flow of water.
• Fix:
  • Check that your home’s water supply is on and faucets are fully open.
  • Ensure inlet hoses are not clogged, kinked, or disconnected.

F8 E2

• Meaning: Issue with the dispenser system.
• Fix:
  • Check for detergent clogs in the cartridge and drawer.

F9 E1

• Meaning: Washer taking too long to drain.
• Fix:
  • Check for clogs or kinks in the drain hose.
  • Ensure the drain hose is installed correctly.
  • Avoid using excessive detergent.

LOC or LC

• Meaning: Control Lock is activated.
• Fix:
  • Press and hold the Control Lock button to deactivate.

Sud or Sd

• Meaning: Excessive suds in the washer.
• Fix:
  • Use high-efficiency detergent.
  • Ensure the drainage hose isn’t kinked or clogged.

Summary

By understanding and addressing these error codes promptly, you can maintain the efficiency and longevity of your Whirlpool washer. If issues persist, consulting with a professional technician is recommended.