GE Washer Not Spinning? Here’s The Fix! A washer that won’t spin can be incredibly frustrating, leaving your clothes soaking wet. This problem can present itself in various ways, such as loud clunking noises during the spin cycle, error codes, or simply a machine that doesn’t spin at all. Here are some common causes and fixes for a GE washer not spinning.
Applicable Models:
- CATL160RBL, CATL260RBL, GTWN2800D1WW, GTWN4250D0WS, GTWN4250D1WS, GTWN4250M1WS, GTWN4950L0WS, WASR3110W0AA, WASR3110W0WW, WBSR1060T2AA, WBSR1060T2WW, WBVH6240FW, WHDSR109J5WW, WHDSR315DAWW, WHDSR316G0WW, WHDSR316G1WW, WHRE5550K2WW, WJRE5550K2WW, WJSR2080T2WW, WJSR2080T5WW, WPRE6150K2WT
1. Redistribute the Load
If your GE washer isn’t spinning, it may be due to an unbalanced load. This can cause the machine to stop spinning to prevent damage.
How to Fix:
- Pause the washer and open the lid or door.
- Redistribute the load evenly around the drum.
- Restart the spin cycle.
- If washing a heavy item like a wool blanket, try washing it by hand if the issue persists.
2. Reset the Washer
Sometimes an electronic glitch can cause the washer to stop spinning. Resetting the washer can clear this issue.
How to Fix:
- Unplug the washer from the electrical outlet or switch off the circuit breaker.
- Wait for one minute.
- Plug the washer back in and turn it on.
- Select a spin cycle to see if it completes.
3. Inspect the Lid Switch
A faulty lid switch can prevent the washer from spinning. The switch ensures the lid is closed during the spin cycle.
How to Fix:
- Locate the lid switch (refer to your manual for the exact location).
- Check if the switch is obstructed or dirty and clean it.
- Ensure the switch is not bent. If it is, try to bend it back into place.
- Test the switch with a multimeter for continuity. Replace it if necessary.
4. Check the Drive Belt
The drive belt connects the motor to the drum. If it’s loose, damaged, or broken, the drum won’t spin properly.
How to Fix:
- Unplug the washer and move it away from the wall.
- Remove the rear panel to access the drum and drive belt.
- Inspect the drive belt for signs of wear, fraying, or cracks. Look for rubber debris.
- Replace the belt if it’s damaged. Note how the belt is threaded on the pulleys before removing it.
- Install the new belt, reassemble the washer, and run a test cycle.
Summary
A GE washer not spinning can be due to various issues such as unbalanced loads, electronic glitches, faulty lid switches, or damaged drive belts. By following these troubleshooting steps, you can identify and resolve the issue. If you’re uncomfortable performing these fixes yourself, it’s best to call a professional technician to avoid further damage to your appliance.
