Frontier Router Login

Frontier router gateway allows you to change WiFi password, SSID, and default settings for Actiontec, Arris, D-Link, Greenwave, Netgear and Pace modems.

How to change Frontier WiFi password and SSID?

Actiontec F2250

1. Open a browser and type 192.168.0.1 in the address bar.
2. Enter User Name admin and Password admin and click Login.
3. Click on Wireless tab > and choose Basic Settings from the left menu.
4. Select Security Type WPA2-Personal and AES for Encryption Type.
5. Enter the WiFi password in the Passphrase/Key field.
6. Click Apply to save the changes.

Actiontec GT784WNV

1. Open a browser and type 192.168.1.1 in the address bar.
2. Enter User Name admin and Password admin and click Login.
3. Go to Wireless  > and select Basic Settings from the left menu.
4. Select WPA/WPA2 Security and enter the WiFi password in the Pre-Shared Key (PSK) field under Home Network.
5. Click Apply to save the settings.

Actiontec WR424 Rev E, F and I

1. Open a browser and type 192.168.0.1 in the address bar.
2. Enter Default User ID admin and Password password or password1 and click Login.
3. Click Wireless Settings > then Basic Settings from the left menu.
4. Enter your WiFi password in the WEP key in section 5 and click Apply.

Arris NVG443B, NVG448B, NVG448BQ, NVG468MQ

1. Open a browser and type 192.168.254.254 in the address bar.
2. Enter Admin in the Name field and Password which is printed on a label on the back of your router.
3. Wireless from the top menu > Total Control Wireless.
4. Choose SSID 2.4 GHz or 5GHz.
5. Enter WiFi name in the Network Name (SSID) field.
6. Enter WiFi password in the Password field.
   
7. Click Apply to save the changes.

Arris NVG589

1. Open a browser and type 192.168.1.254 in the address bar.
2. Click on the Home Network option from the top of the page.
3. Choose Wireless and, if prompted, enter the Access Code which is printed on the back or side of your router.
4. Enter a WiFi name in the Network Name field.
5. Select WPA – Custom under Security settings and enter WiFi password in the Key field.
6. Click on the Save button.

D-Link DSL-2750B

1. Open a browser and type 192.168.1.1 in the address bar.
2. Enter Username admin and the Password that is printed on the bottom of your router and click Login.
3. Click on SETUP > 2.4G Wireless.
4. Enter the name of your WiFi network.
5. Choose WPA2 as Security Mode under Wireless Security Mode.
6. Choose WPA2-PSK (Personal) in the WPA Mode.
7. Enter the WiFi password in the Pre-Shared Key field.
8. Click Apply to save the changes.

Greenwave G1100

1. Open a browser and type 192.168.1.1 in the address bar.
2. Enter the Admin Password which is printed on the back or side of your router and click Next.
3. Select Change Wireless Settings from the lower left-hand side.
4. Enter the WiFi Name in the SSID field. (FiberOptic router has two different wireless network, enter the name for both.)
5. Select Security Type WPA2-Personal and AES for Encryption Type.
6. Enter the WiFi password for both networks.
7. Click Apply.

Netgear D2200D

1. Open a browser and type 192.168.254.254 in the address bar.
2. Enter User Name admin and Password admin and click OK.
3. From the Wireless Settings tab, click on Simple Config in the left menu.
4. Select Use Push Button and click Enable Simple Config and enter the Network Name (SSID).
5. Now click Security Settings and set the Wireless Security mode to WPA and Authentication mode to Personal (Pre-Shared Key).
6. Select WPA as WPA Type and AES as the Data Encryption type.
7. Enter the WiFi password in the WPA Shared Key field.
8. Click on the Apply button.

Netgear 7550

1. Open a browser and type 192.168.254.254 in the address bar.
2. Go to Wireless Settings and click on Basic Settings.
3. Enter your WiFi Network Name in the SSID box.
4. Now go to Advanced Security Settings or Security Settings from the menu.
5. Select WPA Wireless Security and then create a WPA Shared Key to enter your WiFi password.
6. Click Apply.

Pace 4111N, 5031NV, 5168NV

1. Open a browser and type 192.168.1.254 in the address bar.
2. Under Top Networking Features on the home screen, select Wireless.
3. Enter Network Name (SSID) and scroll to the bottom and click Save.
4. If prompted, enter the Password printed on a label on the back of your router and click Submit.
5. To create a new password for your WiFi network, scroll down and select on Set Custom Encryption Key and type your preferred password.
6. Click Save to apply the changes.