PIX-LINK Repeater Login

PIX-LINK web interface allows you to change WiFi password, Network Name (SSID), and default settings at myrepeater.net or 192.168.1.254.

192.168.1.254 Login

Myrepeater.net Login

How to login to PIX-LINK repeater?

1. Plug and connect to your PIX-LINK MiNi Router via Ethernet Cable or Wireless, the router’s network (wireless-AC or wireless N(2.4G)).
2. Open a browser and type myrepeater.net or 192.168.1.254 in the address bar.
3. A login screen will appear. Select the language for installation and type admin in the Password field and click Submit button.
   
4. You will be logged in to PIX-LINK admin panel.

The default language is English. You may select any language as preferred from the drop-down list.

How to Setup PIX-LINK Wireless Repeater Mode?

PIX-LINK MiNi Router has 4 modes: Gateway Mode, Wireless AP Mode, Wireless Repeater Mode and WISP Mode. Follow the steps below to set up the wireless repeater mode:

1. Login to your PIX-LINK admin panel and click on the Wizard button.
2. Now, Select Operation Mode as “Wireless Repeater Mode” and click on the Next button.
   
3. The device will scan for all the wireless networks nearby. Select the wireless network, whose range you want to improve, from the list.
4. Once you have selected the WiFi network, enter the new Extender SSID in the given field, and in the Security Key field, enter the WiFi key of your existing network.
5. Click on Apply to save settings. The router will now reboot, after which you can join the new WiFi network using the same password as your original network.