Hyperoptic Router Login

Hyperoptic WebGUI Login Page allows you to change WiFi password, Network Name (SSID), and default Hyperhub router settings at http://192.168.1.1.

192.168.1.1 Login

How to login to Hyperoptic router?

1. Open a browser and type 192.168.1.1 in the address bar.
2. Enter the Username: admin and Password and click Login.
3. You will be logged in to the Hyperoptic WebGUI.

Note: The default Username is admin and the Password is printed on a sticker on the back of the router.

To log in to your router, first, you need to connect your device to the router’s Wi-Fi network.

How to change Hyperoptic WiFi Password and SSID?

Select your Hyperhub router:

• ZTE H298A
• ZTE H298N
• Tilgin HG2381
• Nokia HA-140W-B
• ZTE H3600

ZTE H298A

1. Log in to the router settings.
2. Click Local Network > WLAN > WLAN Basic > WLAN SSID Configuration.
   
3. Enter the Wi-Fi Network Name in the SSID Name field.
4. Enter the Wi-Fi Password in the WPA Passphrase field.
5. Click Apply.

You need to configure 2.4GHz and 5GHz Wi-Fi parameters separately.

ZTE H298N

1. Log in to the router settings.
2. Navigate to Network > WLAN > SSID Settings.
   
3. Enter the Wi-Fi Network Name in the SSID Name field and click Submit.
4. Navigate to Network > WLAN > Security.
   
5. Enter the Wi-Fi Password in the WPA Passphrase field and click Submit.

Tilgin HG2381

1. Log in to the router settings.
2. Navigate to Wireless and click on SSID (for example Tilgin_HG2381_24G) in the Existing SSIDs section and select Configuration.
   
3. Enter the Wi-Fi Network Name in the Name field and click Apply.
   
4. Navigate to SSID > Security.
   
5. Enter the Wi-Fi Password in the Passphrase field and click Apply.

Nokia HA-140W-B

1. Log in to the router settings.
2. Go to Network > Wireless (2.4GHz) or Wireless (5GHz).
   
3. Enter the Wi-Fi Network Name in the SSID Name field.
4. Enter the Wi-Fi Password in the WPA Key field.
5. Click Save.

ZTE H3600

1. Log in to the router settings.
2. Click Local Network > WLAN > WLAN Basic > WLAN SSID Configuration.
   
3. Enter the Wi-Fi Network Name in the SSID Name field.
4. Enter the Wi-Fi Password in the WPA Passphrase field.
5. Click Apply.