18.8 C
Los Angeles
Wednesday, September 27, 2023

Safaricom Contacts

Safaricom Contacts. Safaricom PLC is a listed Kenyan mobile...

Kamel Park Hotel Contacts

Kamel Park Hotel is a great definition...
HomeComputers and Electronics192.168.1.1 - Login Admin – Login Admin

- Advertisement - – Login Admin. To access the admin page type into your web browser’s address bar

Login Steps

Accessing your router admin through  address will allow you to change the settings and configurations that your router software provides. Check the address you input not to confuse it with http://192.168.l.l.

  1. To configure the router/ change its settings or define/change password, you need to log on to the router admin. Enter into your browser’s address bar (URL bar).
  2. If you receive an error, then 192.168.l.l is not the router’s IP address. Type it again without the help of the autocomplete. Sometimes it might mislead you. You can also find tips on how to identify your router’s IP address in this article.
  3. If you have forgotten your username and password, you can follow these instructions to recover them. If you haven’t changed the default username and password that came with the router, you can consult our default router usernames and passwords list.

Troubleshooting or 192.168.l.l

If you have forgotten your username and password, you can follow these instructions to recover them. If you haven’t changed the default username and password that came with the router, you can consult our default router usernames and passwords list.

  • ConnectionMake sure the router is connected to your computer or other devices via ethernet cable or WiFi. You should check all the lights of your router: the Power light, the Internet light, WI-FI light and Ethernet lights.
  • RebootIf the router is connected to a device, then reboot the device. For this, first, unplug the router and modem and replug both, after a few moments, one by one. Wait for two minutes to check again.
  • FirewallsIf you are behind any firewall, it is important to disable the same because sometimes a router might be unable to access the internet on account of the conflict with the firewall settings.
  • 192.168.l.lTry to access router console through the browser by typing the router’s IP in the address bar of the browser. The address is and not 192.168.l.l. If these measures do not help, you can reset the router to factory settings by pressing the reset button on the router. IP Address And How To Use It

Are you using your router to its full ability? If you’ve been a regular internet user, you might have at some point come across a numerical representation like This article explains what is and serves as a basic guide on how to harness it while accessing the internet.

- Advertisement -

What is

You can call it an online address. Each device connected to the internet is supposed to have a unique address, which will enable effective exchange of data between the device and the rest of the digital world. This is similar to the unique postal address/email/ telephone number that we each have to exchange communication.

On the internet, this address is known as the Internet Protocol (IP) address. In a typical home network, the router will assign an IP address to each device connected to it. It has its own IP too (router IP). A specific range of IP addresses has been reserved for private networks such as homes, Local Area Networks (LAN)/Wireless Area Networks (WAN) within an enterprise and so on. These IP addresses cannot be assigned to a publicly accessible website (internet sites). These ranges are:

- Advertisement - -

The IP address always contains a set of 4 numbers ranging between 0 and 255. There are 2 parts to the address; ‘Network Id’, which is the first three numbers in the IP address and the device id which is the fourth number. So, for example in, the network id is 192.168.1 and the device id is the last number 20. If you have multiple devices connected on your home network, they all will have the first three digits common, signifying their existence on the same network, while the fourth number will be different, which will indicate their unique identity. Dynamic Host Configuration Protocol (DHCP) configured on the routers enables them to automatically assign a unique IP to each device.

Other than the private address for itself and its devices, there also exists a public address for a network/router. All the devices on a given network share a common public address that is visible to the external network. 

- Advertisement -

The router translates private address to a public address while communicating with an external network and converts public address to private when communicating back with the devices within its network. This process is called Network Address Translation (NAT).

Out of the possible range of addresses available for the home network, has been conventionally assigned by most manufacturers as the router IP, making it the default gateway or access point through which devices on the network communicate and connect with the rest of the world. This is why has been called as the default gateway. This standardization makes it easy for laypeople to keep the address in mind in order to access the administrative console of the router by typing into the address bar of the browser.

Most of the mainstream router manufacturers use as the router IP, including D-link, Asus, Netgear, Cisco, Linksys, Tp-Link, Tenda, SMC Networks, Huawei and Dell. The router always comes with a manual mentioning the specific router IP.

Getting Connected

Here are four essential steps you have to make before starting to configure the router.

  • Internet connection – check if the available internet connection is working or not by connecting the ethernet /ISP cable directly to a laptop or computer.
  • Unbox the router – Usually, the router is accompanied by a manual that mentions its default gateway and username and password. The router ideally should be placed on a higher shelf and in a central location.
  • Connect to the power source – Booting of the router may take some time. When the router is ready to be used, it will typically indicate a green light or as per the details in the manual.
  • Connect the router to the internet source: Connect the broadband cable/DSL modem/ISP gateway cable to the router’s internet port. This port usually has a different color or noticeable placement.

Make sure to check out our social media to keep track of the latest content.

Instagram @nyongesasande

Twitter @nyongesasande

Facebook Nyongesa Sande

YouTube @nyongesasande

Disclaimer: The information that Nyongesasande.com provides on this website is obtained from publicly available resources and is intended for information or educational purposes only. We aim to present the most accurate information possible. Through this website, you might link to other websites which are not under our control. We have no control over the nature, content and availability of those websites. Inclusion of any links does not necessarily imply a recommendation or endorsement of the views expressed within them. All content on this website is copyright to the website’s owner and all rights are reserved. We take no responsibility for, and will not be liable for, the website being temporarily unavailable due to technical issues beyond our control. Please refer to our terms and conditions and privacy policy before using this website.

- A word from our sponsors -

Most Popular

More from Author

Safaricom Contacts

Safaricom Contacts. Safaricom PLC is a listed Kenyan mobile network operator headquartered at Safaricom...

Duncan Kiige: A Remarkable Force in the World of Social Work

Duncan Kiige is indeed a force to reckon with in the...

Kamel Park Hotel Contacts

Kamel Park Hotel is a great definition of tranquility due to...


Makro and The Fruitspot are the two components of Masswarhouse. Makro...

- A word from our sponsors -

Read Now