Cisco Default Login – Username, Password and IP Address

Computers and ElectronicsCisco Default Login - Username, Password and IP Address
- Advertisement -

Cisco Default Login – Username, Password and IP Address. Cisco Systems, Inc., commonly known as Cisco, is an American-based multinational digital communications technology conglomerate corporation headquartered in San Jose, California. Cisco develops, manufactures, and sells networking hardwaresoftwaretelecommunications equipment and other high-technology services and products.[4] Cisco specializes in specific tech markets, such as the Internet of Things (IoT), domain securityvideoconferencing, and energy management with leading products including WebexOpenDNSJabber, Duo Security, and Jasper. Cisco is one of the largest technology companies in the world ranking 74 on the Fortune 100 with over $51 billion in revenue and nearly 80,000 employees.

Cisco Systems was founded in December 1984 by Leonard Bosack and Sandy Lerner, two Stanford University computer scientists who had been instrumental in connecting computers at Stanford. They pioneered the concept of a local area network (LAN) being used to connect distant computers over a multiprotocol router system. By the time the company went public in 1990, Cisco had a market capitalization of $224 million; by the end of the dot-com bubble in the year 2000, this had increased to $500 billion, surpassing Microsoft as the world’s most valuable company. As of December 2021, Cisco had a market capitalization of around $267 billion.

Cisco stock (CSCO) was added to the Dow Jones Industrial Average on June 8, 2009, and is also included in the S&P 500 Index, the Russell 1000 IndexNASDAQ-100 Index and the Russell 1000 Growth Stock Index.

In 2021, Fortune ranked Cisco number one for the second year on their annual list of the 100 Best Companies to Work For based on employee satisfaction surveying. LinkedIn and Glassdoor also ranked Cisco as a top place to work in 2021 and recent years.

Default logins for Cisco

39 %IP Address:

- Advertisement -

33 %IP Address:

17 %IP Address:

6 %IP Address:

6 %IP Address:

Cisco Router Login

Having trouble with your wifi network? Want to secure your network by changing the network name and password? Or, do you want to make any other change to your Cisco router’s configuration?

You can do all of this by logging into the setup pages for your Cisco router. All Cisco routers allow you to change their configuration by logging in to their browser-based setup pages.

What you’ll need

Chances are, you already have everything you need to access your Cisco router:

  • Your Cisco router
  • A computer or laptop with an internet browser
  • An ethernet cable or WiFi connection

Cisco Login Steps

If you don’t want to mess around with complicated command-line instructions, this is the most user-friendly way to manage your router and WiFi network.

Luckily, there is a standard process to access these setup pages that’s the same for almost every Cisco router.

  1. Make Sure You are Connected to Your Cisco Router NetworkYou’ll first need to connect to your router in order to reach its web-based setup pages. Firstly, make sure that your router is powered on. You can use either an ethernet or WiFi connection, but an ethernet connection is recommended when accessing the setup pages.To do this, plug an ethernet cable into a port on your laptop and one of the ports on your router. To connect using WiFi, look for the network under the available networks on your computer and connect to it. If you’re able to successfully connect to the network, you can now proceed to the next steps.
  2. Navigate to IP Using the BrowserOpen any web browser and type in in the address bar. This should be the default Cisco router IP address and will take you to your Cisco router login page. is the most common default IP address for Cisco routers.  However, if that doesn’t work, there are some other possible IP addresses. Also, try using:-–
  3. Find Your Router IP Address Using ‘ipconfig’Finally, you can find your router IP address by running an IP config scan using the following steps:#1: Click Start and type ‘cmd’ in the search bar#2: Select ‘Command Prompt’ to open it#3: Type in ‘ipconfig’ and hit enter#4: Look for your router’s IP address next to ‘Default Gateway’Now, you can type this IP address into the address bar of your browser to navigate to the setup pages.
  4. Use Default Username & Password to Log InCisco routers use default login credentials to make it easy to access the setup pages. The most common combination is:Username: adminPassword: adminIf that doesn’t work, it might also be:Username: CiscoPassword: CiscoThe login credentials can also be found on the back of some routers. If your login details have been changed but you can’t remember what they are, you will need to reset your router to its default configuration.
  5. Configure the Cisco Router & Change SettingsIf you’ve made it this far, you should now be logged into the router’s setup pages. From here, you can configure your router’s security settings, reset your router, or change your login details.That’s all you need to do to access your Cisco router! Easy, right?Remember to write down your previous settings and what changes you make so that you can retrace your steps if something goes wrong. If you change your username or password, write these down too so that you don’t forget.


  • The router stops working after changing the settingsYou might accidentally change some settings you’re not supposed, after which your router no longer functions correctly. Don’t panic! You can always go back to the default configuration by resetting your router to factory settings.
  • How to Reset Your Router to the Default Configuration#1: Switch off your router but keep the power plugged in.#2: Find the reset button at the back of the router, it’s usually a small button and you may need a pin to press it.#3: Press and hold the reset button for 10 seconds.#4: The router will then start the reset process. Give it about 5 to 10 minutes to finish booting. Check the lights; they will flicker while the router is busy but will stay when it’s done.#5: Switch off the router. It’s now reset to factory settings and will boot with the default configuration next time you switch it on.
  • Contact Your Cisco Support RepresentativeIf for any reason none of these steps work, it’s time to pick up the phone and give Cisco a call. Chances are it’s because you have a router with a non-standard configuration. So, try to gather all information on the type of router you have by looking at the information at the back of the router and by finding the packaging or user manual.

Models using Cisco

FAQ Brands

1. What is the username and password of Cisco routers?The majority of the Cisco routers have a default username of admin and a default password of admin

2. What is the default password of a Cisco router?The majority of the Cisco routers have the default password admin

3. What is the default IP of a Cisco router?The majority of the Cisco routers use as the default IP address

4. How to log in to a Cisco router?First, type the router’s IP address in your browser address bar, Then, enter your router username and password, and then click OK or LOGIN.
Above, you can find the most probable default credentials.

5. How to troubleshoot a Cisco router?First check if the WAN cable is connected to the correct port of the router which is labelled as “WAN”. Then check if you are connected either by using the Wi-Fi network or a LAN cable connected to a LAN-labelled port of the router.

6. How to reset Cisco router login password?Resetting the admin password of most Cisco routers is simple and requires pushing a reset button, located on the router itself, for 5 to 10 seconds.

- Advertisement -

Check out our other content

Check out other tags:

Must Read